安装不锈钢配电箱的必备条件
Now the market demand for stainless steel distribution box is more and more big, but the stainless steel distribution box, its use requirements are more stringent, Ji'nan Feng Feng Industrial Co., Ltd. for everyone to do a brief introduction:
1、输送和存储当中的热度可在-25摄氏度—+55摄氏度之间,在不超过24小时内可达到+70摄氏度超过24h。
1, transport and storage of heat can be between -25 degrees Celsius - +55 degrees Celsius, in less than 24 hours can reach +70 degrees Celsius, more than 24h.
2、周围的环境温度要在-5摄氏度—+40摄氏度,而且它的24小时平均数不能超过+35摄氏度;
2, the ambient temperature should be at -5 degrees Celsius - +40 degrees Celsius, and its 24 hours average can not exceed +35 degrees celsius;
3、环境对应的湿度在高热度为+40摄氏度时不能超过50%;在稍低温度下能够有稍高的对应湿度,潮月的月平均低湿度不出+25摄氏度,这个月的月平均高对应湿度不超过90%,还要考虑因热度的变化发生在配电箱表面的凝露;它的污染等级三。
3, the corresponding environmental humidity in the highest heat to +40 degrees Celsius can not exceed 50%; to have the corresponding higher humidity at a slightly lower temperature, the tidal monthly average minimum humidity not +25 degrees Celsius, the monthly average maximum corresponding humidity of not more than 90%, but also consider the change of heat for in distribution box surface condensation; its pollution level three.
4、它的安装地点高度不能超过2000米;
4, its installation site height can not exceed 2000 meters;
您的需求就是我们努力的方向,您的追求就是我们的追求,欢迎您的到来,我们一起进步,一起创新!
Your demand is the direction of our efforts, your pursuit is our pursuit, welcome your arrival, we progress together, with innovation!