The load-bearing capacity of cable bridge is a factor that must be considered in the selection. Now Jinan cable bridge manufacturer will introduce it to you.

1、动荷载是指电缆桥架安装和维护过程中，施工维修人员的重量。对于轻型电缆桥架，一般不考虑动荷载，即不允许在桥架上站人，如果需要考虑站人，则应将跨距适当缩小。

1. Dynamic load refers to the weight of construction and maintenance personnel in the process of installation and maintenance of cable bridge. For light cable bridges, dynamic loads are generally not considered, that is, people are not allowed to stand on the bridge. If people need to be considered, the span should be reduced appropriately.

2、静荷载是指敷设在电缆桥架内的电缆种类、根数、每根的外径重量/单位长度，pp管按电缆敷设的不同路由分别列表统计。

2. Static load refers to the type, number of cables laid in the cable bridge, weight/unit length of each outer diameter. PP pipe is listed and counted according to different routes of cable laying.

3、附加荷载仅在室外是指冰雪、风和电磁力所形成的荷载，它与安装场所的地区自然气象条件和带电体的性质有关，设计中应根据各种条件加以计算。

3. Additional load refers to the load formed by ice, snow, wind and electromagnetic force only outdoors. It is related to the natural meteorological conditions in the installation site and the nature of charged bodies. It should be calculated according to various conditions in the design.

本文来自：济南电缆桥架，更多的内容请点击：http://www.sdhangfeng.com，我们将会为您提问的问题提供一个满意的服务，欢迎您的来电！

This article is from Jinan Cable Bridge. For more information, please click on http://www.sdhangfeng.com. We will provide you with a satisfactory service for your questions. Welcome your call!