Jinan cable bridge is more and more widely used in electrical engineering or construction. Therefore, installation is a problem. We need to pay attention to the stability of the bridge. In installation, a bridge is related to many factors. The same bridge is stable, and the quality is affected by many factors. Today, how do we solve the problem of cable tray stability.

电缆桥架主要用于电力传输阶段、电缆和光纤的支撑、保护和管理。当电缆和纤维布线量大时，容易下垂，所以技术人员想到用金属材料做管道廊道来保护纤维和电缆。然而，传统全封闭管道的维护是复杂和昂贵的。因此，开放式桥在数据和IDC机房中越来越受欢迎。

Cable tray is mainly used for power transmission stage, cable and optical fiber support, protection and management. When the amount of cable and fiber wiring is large, it is easy to sag, so the technical personnel thought of using metal materials as pipe gallery to protect the fiber and cable. However, the maintenance of traditional closed pipelines is complex and expensive. Therefore, open bridge is more and more popular in data and IDC room.

1. 济南电缆桥架安装前注意定位放线，根据施工图确定位置，并同时画水平线和垂直线。接下来，固定配件、螺丝和膨胀丝，固定桥架。下一步是对桥架进行调整，使其稳定在设计位置，完全固定。

1. Pay attention to positioning and setting out before installation of Jinan cable bridge, determine the position according to the construction drawing, and draw horizontal and vertical lines at the same time. Next, fix the accessories, screws and expansion wires to fix the bridge. The next step is to adjust the bridge to make it stable in the design position and completely fixed.

2为桥梁设计被动电缆线路的需要提供不同的方向,其中,弱电系统内的电缆应分类布桥,因为这是一个更好的路由和安装符合要求的走向,结合实际的结构和空调的位置等等。

2. Different directions should be provided for the passive cable line design of bridges. Among them, the cables in weak current system should be arranged by categories, because this is a better route and installation, which meets the requirements of the trend, combined with the actual structure and the location of air conditioning, etc.

济南电缆桥架

Jinan cable bridge

3.桥梁框架之所以备受关注，是因为其设计结构简单，安装门槛低，养护费用高。清洗、检测方便，能适应各种复杂恶劣环境。选择桥架时，应选择适合自己的桥架，并注意安装步骤。

3. The reason why the bridge frame is concerned is that its design structure is simple, the installation threshold is low, and the maintenance cost is high. It is convenient for cleaning and testing, and can adapt to various complex and harsh environments. When selecting the bridge, it is necessary to select the bridge suitable for itself and pay attention to the installation steps.

4,主动被动的电缆不能并排电缆敷设,条件是有限的,如果在同一桥商店,所以他需要采用金属板设置在中间,这导致电缆,以避免交叉平面,桥穿过地板或膨胀接头,应留在架构图和相应的位置,避免施工临时钻空的,因为它会损害民事结构,在桥的设计,为了防止电磁辐射的干扰，应考虑桥梁的密封。

4. The active and passive cables cannot be laid side by side, and the conditions are limited. If they are in the same bridge shop, they need to use metal plates to set them in the middle, which leads to cables to avoid cross plane. The bridge passing through the floor or expansion joint should be left in the framework drawing and corresponding position to avoid temporary drilling in the construction, because it will damage the civil structure in the bridge design, In order to prevent the interference of electromagnetic radiation, the sealing of bridge should be considered.

以上就是今天为大家分享的关于影响济南电缆桥架稳定性的因素的相关内容，桥梁的稳定性和做工程一定要选择好的桥梁产品，从基础到避免以后出现问题。

The above is the related content about the factors that affect the stability of Jinan cable bridge. The bridge stability and engineering must choose good bridge products, from the foundation to avoid future problems.