济南电缆桥架承受的三大荷载是什么?
电缆桥架承受的三大荷载:
The cable tray bears three loads:
济南电缆桥架再在电缆铺设工程中,电缆桥架是电缆的重要支柱,它承载着电缆的所有重量和所有外界的荷载,所以,在生产时一定要注重它的承载能力,下面济南电缆桥架生产厂家对它的承载力做了一下分析,一起来了解一下吧:
Jinan cable bridge in the cable laying project, cable tray is an important pillar of the cable, it carries all the weight of the cable and all external loads, so, in the production must pay attention to its bearing capacity, the following cable tray manufacturers to its bearing capacity analysis, let's understand it:
济南电缆桥架的承载能力是由荷载来决定的,它的荷载分为静荷载、动荷载和附加荷载,静荷载是指敷设在桥架内的电缆种类、根数、每根的外径重量/单位长度,按电缆敷设的不同路由分别列表统计。
The bearing capacity of Jinan cable bridge is determined by the load. Its load is divided into static load, dynamic load and additional load. Static load refers to the type, number of cables laid in the bridge, and the outer diameter weight / unit length of each cable, which are listed and counted according to different routes of cable laying.
济南电缆桥架动荷载是指桥架安装和维护过程中施工维修人员的重量,对于轻型电缆桥架,一般不考虑动荷载,即不允许在桥架上站(行)人,如果需要考虑站人,则应将跨距适当缩小。
Dynamic load of Jinan cable bridge refers to the weight of construction and maintenance personnel in the process of bridge installation and maintenance. For light cable bridge, dynamic load is not considered generally, that is, people are not allowed to stand (walk) on the bridge. If people need to be considered, the span should be appropriately reduced.
附加荷载仅在室外是指冰雪、风和电磁力所形成的荷载,它与安装场所的地区自然气象条件和带电体的性质有关,设计中应根据各种条件加以计算。
The additional load only refers to the load formed by ice, snow, wind and electromagnetic force outdoors. It is related to the natural weather conditions of the installation site and the nature of the charged body. It should be calculated according to various conditions in the design.
看了上面电缆桥架生产厂家给我们做的分析,我们可以看出来电缆桥架所承受的荷载很多,所以,在生产中一定要考虑各种因素,提高它的质量和承载能力!
Looking at the above cable tray manufacturer's analysis for us, we can see that the cable tray bears a lot of loads, so, in the production, we must comprehensively consider various factors to improve its quality and bearing capacity!