What problems will the cable tray encounter in use?

电缆桥架厂家作为一种智能化弱电体系，在咱们往常的生活中发挥着重要的作用。但是其往常也会呈现毛病，给我们生活形成困惑。那我们知道电缆桥架都会呈现哪些毛病吗?

As an intelligent weak current system, cable tray manufacturers play an important role in our usual life. But it will also present problems as usual, which puzzles our life. Do we know what problems will appear in the cable tray?

一、可能呈现的毛病：电缆的各部分都呈现短路表象，这类毛病可能会形成配电柜上的电流继电器作业，对电缆形成的损坏十分严峻;

1、 Possible faults: all parts of the cable show the appearance of short circuit, which may cause the operation of current relay on the distribution cabinet, and the damage to the cable is very serious;

二、会呈现的毛病：电缆内部呈现短路，这类毛病通常是因为电缆质量低质而形成的，外表上不会流露痕迹;

2、 Problems that will appear: there is a short circuit inside the cable, which is usually formed due to the low quality of the cable, and there will be no trace on the surface;

三、可能会呈现整条电缆被烧断或许某处电缆被烧断，使得电缆在毛病处损坏的十分严峻;

3、 It may appear that the whole cable is burnt out, or the cable is burnt out somewhere, which makes the cable seriously damaged at the fault;

四、可能会呈现的毛病为电缆桥架只有一条短路，毛病处电缆损坏较轻，但还是会有很明显的痕迹。

4、 The possible fault is that there is only one short circuit in the cable tray. The cable damage at the fault is light, but there will still be obvious traces.

这类毛病可能会呈现的原因在于电流太大或许电缆质量太差而形成的。

The reason why such problems may appear is that the current is too large or the cable quality is too poor.

所有的机械设备使用后都要定期进行检查、保养，电缆桥架厂家就来谈谈如何对电缆桥架设备进行检修、保养。

All mechanical equipment should be inspected and maintained regularly after use. The cable tray manufacturer will talk about how to overhaul and maintain the cable tray equipment.

1、电缆桥架设备平衡气缸动作状况及其机油润滑系统油路,接头等测试检查.

1. Test and check the action condition of balance cylinder of cable tray equipment and its oil circuit and joint of oil lubrication system

2、电缆桥架设备滑块与导轨之间的摩擦较为频繁，应做必要的调整较正，检查接头部位的润滑管路等，保证良好的运转。

2. The friction between the sliding block of cable tray equipment and the guide rail is relatively frequent, so necessary adjustment and correction shall be made, and the lubrication pipeline at the joint shall be checked to ensure good operation.

3、定期为电缆桥架设备齿轮部位润滑：齿轮传动箱及内部机件因为经常运转损坏的可能性比较大，出现松动的可能性更大。

3. Regularly lubricate the gear parts of cable tray equipment: the gear box and internal parts are more likely to be damaged due to frequent operation, and there is a greater possibility of looseness.