电缆桥架作为电力工程行业中备受欢迎的产品，电缆桥架在市场上的销量一直处于一路的状态，厂家在生产的时候要注意哪些事项呢？下面小编为您分析分析：

As a popular product in the power engineering industry, cable tray has always been in an advanced state of sales in the market. What should manufacturers pay attention to when producing cable tray? The following editor will analyze and analyze for you:

电缆桥架的四点性能

Four points of environmental protection performance of cable tray

1、成分内不含Ph、cr、Hg等重金属；

1. The ingredients do not contain heavy metals such as Ph, Cr, Hg, etc;

2、归属于厚膜型材料，触变性能好，经充分搅拌后，少加或不加稀释剂，即可涂装施工。由于镀锌固体分含量高达77％，固线器，一次无气喷涂可获得较高的膜厚，减少了有机溶剂的挥发量，降低干燥能耗，这些均有利于环境保护。

2. It belongs to thick film material with good thixotropic property. After full mixing, with little or no diluent, coating can be carried out. Due to the high solid content of 77% in zinc plating, a higher film thickness can be obtained through a fixed wire device and a single airless spraying, reducing the volatilization of organic solvents and drying energy consumption, all of which are beneficial for environmental protection.

3、经过测试证明：绝大多数镀锌的溶剂和稀释剂内不含甲苯、酮类、卤代烃等毒性大的有机溶剂。

3. The test shows that most of the solvents and diluents for zinc plating do not contain toluene, ketones, haloalkane and other toxic organic solvents.

4、电缆桥架厂家电缆桥架是替代热浸镀锌、电弧(热)喷锌的好材料，对减少三废、降低能耗，提高环境保护的社会效益的作用就更加明显。

4. The cable tray manufacturer cable tray is a good material to replace hot-dip galvanizing and arc (hot) zinc spraying, which plays a more obvious role in reducing the three wastes, reducing energy consumption and improving the social benefits of environmental protection.

此外山东电缆桥架是以金属为主要原材料进行加工制作的，因此工人在生产中要注意佩戴手套，防止被金属割伤；有条件的厂家好为工人配备护目镜和工作服，这样对工人的保护更。桥架的生产大多是按照设计图纸和客户要求进行加工制作，所以生产前要仔细阅读图纸，按照要求调整生产设备上的数值，防止出现尺寸等不合格的产品出现。

In addition, cable tray in Shandong is processed and manufactured with metal as the main raw material, so workers should pay attention to wearing gloves in production to prevent being cut by metal; Manufacturers with conditions are better equipped with goggles and work clothes for workers, which provides more comprehensive protection for workers. The production of cable trays is mostly based on the design drawings and customer requirements, so it is necessary to carefully read the drawings before production, adjust the values on the production equipment according to the requirements, and prevent the occurrence of unqualified products such as dimensions.

在电缆桥架的加工制作过程中，除了对工人有要求外，生产设备也是注意事项之一。电缆桥架厂家用电是任何生产都要特别注意的事项，生产设备的线路也属于用电的范围，启动机器前好进行彻底检查，尤其是隔段时间没有使用的设备，更要注意其开关和线路。更多相关内容就来我们网站http://www.sdhangfeng.com咨询！

In the process of processing and manufacturing cable tray, in addition to the requirements for workers, production equipment is also one of the precautions. The electrical safety of cable tray manufacturers should be paid special attention to in any production. The line safety of production equipment also belongs to the scope of electrical safety. Thorough inspection should be carried out before starting the machine, especially for the equipment that has not been used in intervals, attention should be paid to the safety of its switches and lines. For more related content, come to our website http://www.sdhangfeng.com consulting service