电缆桥架和母线槽的安装有什么要求?
电缆桥架安装时的支托,是通过立柱和托臂来完成的。铝合金电缆桥架由铝合金揉捏成型,规范精度高、强度好、外形美丽、重量轻、承载才调大。
The support for cable bridge installation is accomplished through columns and brackets. Aluminum alloy cable tray is kneaded by aluminum alloy. It has high specification accuracy, good strength, beautiful appearance, light weight and large load capacity.
(1)金属桥架和线槽及其支架全长不少于2处与接地(PE)或接零(PEN)干线相连接。
(1) metal bridge and cable trunnion and its support are not less than 2 full length, connected to earth (PE) or to zero (PEN) trunk.
(2)非镀锌桥架间连接板的两端及非镀锌线槽间连接板两端要跨接铜芯接地线,其小截面积不小于4mm2.
(2) the two ends of the connecting plate between the non galvanized bridge and the connection plate of the non galvanized wire slot shall be connected with the copper core grounding wire, and the minimum sectional area is not less than 4mm2.

(3)镀锌桥架间连接板及线槽间连接板间的两端不跨接接地线,但连接板两端不少于2个有防松螺帽或防松垫圈的连接固定螺栓。
(3) the two ends of the connecting plate between the galvanized bridge and the connecting plate between the wire grooves are not connected to the ground wire, but the two ends of the connecting plate are not less than 2 fixed bolts with a loose screw cap or a looser washer.
(4)桥架应敷设在易燃易爆气体管道和热力管道的下方,与管道的小净距,符合表6—11规定。
(4) the bridge shall be laid under the inflammable and explosive gas pipeline and the thermal pipeline, and the minimum net distance between the bridge and the pipeline shall comply with the regulations of table 6 to 11.
(5)敷设在竖井内和穿越不同防火区的桥架,按设计要求位置,有防火隔堵措施。
(5) laying a bridge in the shaft and crossing different fire zones. Fire prevention and blocking measures shall be taken according to the design requirements.
(6)桥架与支架间螺栓、桥架连接板螺栓、固定牢固,螺母位于桥架外侧。
(6) the bolts between the bridge frame and the bracket, the bolts of the bridge connecting plate, and the bolts are firmly fixed, and the nuts are positioned outside the bridge frame.
感谢大家在百忙之中关注公司发布的产品信息,如果你想要了解更多,可以来我们公司咨询。我们欢迎大家的光临,并与你的合作!
Thank you for your busy schedule to pay attention to the product information released by the company. If you want to know more, you can come to our company for consultation. We welcome your presence and cooperate with you!
The support for cable bridge installation is accomplished through columns and brackets. Aluminum alloy cable tray is kneaded by aluminum alloy. It has high specification accuracy, good strength, beautiful appearance, light weight and large load capacity.
(1)金属桥架和线槽及其支架全长不少于2处与接地(PE)或接零(PEN)干线相连接。
(1) metal bridge and cable trunnion and its support are not less than 2 full length, connected to earth (PE) or to zero (PEN) trunk.
(2)非镀锌桥架间连接板的两端及非镀锌线槽间连接板两端要跨接铜芯接地线,其小截面积不小于4mm2.
(2) the two ends of the connecting plate between the non galvanized bridge and the connection plate of the non galvanized wire slot shall be connected with the copper core grounding wire, and the minimum sectional area is not less than 4mm2.

(3)镀锌桥架间连接板及线槽间连接板间的两端不跨接接地线,但连接板两端不少于2个有防松螺帽或防松垫圈的连接固定螺栓。
(3) the two ends of the connecting plate between the galvanized bridge and the connecting plate between the wire grooves are not connected to the ground wire, but the two ends of the connecting plate are not less than 2 fixed bolts with a loose screw cap or a looser washer.
(4)桥架应敷设在易燃易爆气体管道和热力管道的下方,与管道的小净距,符合表6—11规定。
(4) the bridge shall be laid under the inflammable and explosive gas pipeline and the thermal pipeline, and the minimum net distance between the bridge and the pipeline shall comply with the regulations of table 6 to 11.
(5)敷设在竖井内和穿越不同防火区的桥架,按设计要求位置,有防火隔堵措施。
(5) laying a bridge in the shaft and crossing different fire zones. Fire prevention and blocking measures shall be taken according to the design requirements.
(6)桥架与支架间螺栓、桥架连接板螺栓、固定牢固,螺母位于桥架外侧。
(6) the bolts between the bridge frame and the bracket, the bolts of the bridge connecting plate, and the bolts are firmly fixed, and the nuts are positioned outside the bridge frame.
感谢大家在百忙之中关注公司发布的产品信息,如果你想要了解更多,可以来我们公司咨询。我们欢迎大家的光临,并与你的合作!
Thank you for your busy schedule to pay attention to the product information released by the company. If you want to know more, you can come to our company for consultation. We welcome your presence and cooperate with you!
上一篇:槽式电缆桥架的型式及品种
下一篇:电缆桥架是支撑的主要部件
下一篇:电缆桥架是支撑的主要部件
相关文章 / Recommended news
- 山东电缆桥架屋顶吊装:配件清单+标准化流程,新手也能零失误
- 济南电缆桥架安装:200多斤600×200桥架,这样吊装又
- 山东电缆桥架定制:耐火板与防火型的核心区别,一文读懂避坑指南
- 济南电缆桥架选型误区:100×100规格加隔板难?航丰的方案破解施工难题
- 山东电缆桥架避坑!贯穿孔成火灾“隐形通道”?3步防火实操筑牢防线
- 济南电缆桥架铺设踩坑,层数、根数、限制,规范不看必返工
- 山东电缆桥架(镀锌款)接地线误区,接错必返工,规范要点一文说清
- 济南电缆桥架线缆捆扎错了=埋隐患,4种规范方法,施工必看
- 山东不锈钢桥架现场打孔避坑!4步标准流程,90%施工方少走弯路不损桥架
- 山东电缆桥架选型封神指南!记住3句话,70%工程方避开选型陷阱不花冤枉钱
阳极氧化铝合金桥架
托盘式电缆桥架
梯式电缆桥架
梯式不锈钢电缆桥架
深灰色金属防火电缆桥架


