电缆式桥架为敞开式，线缆自然通风散热，热量不会聚集，桥架内温度不会升高。因而线缆功能得到优化，能够运用截面积更小的电缆，然后下降电缆收购本钱。

Cable type bridge is open type, natural ventilation and heat dissipation cable, heat will not gather, the temperature in the bridge will not rise. As a result, the cable function is optimized to use smaller cross-sectional cables, and then reduce the cost of cable acquisition.

由于线缆可见，要求施工时线缆次序摆放，并且电缆式桥架做工精细，更能按照客户要求喷涂成各种色彩，整个体系在装置结束后显得很生动，打破曾经机房黑色或灰色为主调的烦闷气氛。别的一种盛行的做法是选用本性的桥架但运用五颜六色电缆，由所以敞开桥架，所以装置结束后也非常漂亮。

As the cable can be seen, the requirements for the construction of the cable sequence placed, and cable-type bridge work fine, can be sprayed into a variety of colors according to customer requirements, the whole system after the end of the device is very vivid, breaking the once black or gray room as the main tone of the boring atmosphere. Another popular method is to use the natural bridge but use colorful cables, so the bridge is open, so the end of the device is also very beautiful.

电缆式桥架虽然简便，但并不献身重要的承载功能。桥架选用直径4mm-6mm的高品质钢丝依据力学原理进行优化装备混合，并选用特别订制的焊接机进行横纵穿插焊接及其侧弦和顶弦的T型焊接，以到达每个焊点能承受500公斤的张力。T型焊接所形成的T型边缘是电缆式桥架的全球，避免了焊接点的尖锐端面，不仅能保护线缆，对施工及装置人员也更。

Cable bridge is simple but not dedicated to the most important bearing function. High-quality steel wires of 4mm-6mm diameter are selected to optimize the mixing of equipment according to mechanical principles, and special welding machines are selected for longitudinal and transverse interpolation welding and T-type welding of side chord and top chord to reach each solder joint which can withstand 500 kg tension. The safe T-edge formed by T-type welding is a global patent for cable-type bridge. It avoids the sharp end face of welded joints, not only protects the cable, but also is safer for construction and installation personnel.

(本文的精彩内容来自:济南航丰实业有限公司，更多的详细内容请山东电缆桥架官网：谢谢您的到来 https://www.sdhangfeng.com)

(The highlight of this article comes from: Jinan Hangfeng Industrial Co., Ltd., more details please Shandong cable bridge official website: Thank you for coming to https://www.sdhangfeng.com)