防腐桥架是如何进行表面处理的
防腐桥架表面处理的技术要求。在使用桥架前需要对它的表面进行处理,这样可以确保它的使用,而防腐桥架的处理方式是其中的一种,它是在特定的工艺环境下制造而成的,具有很好的防腐性能,那么防腐桥架表面处理的技术要求有哪些呢,下面由桥架厂为大家做详细的介绍。
Technical requirements for surface treatment of anticorrosive bridge frames. Before using the bridge, we need to treat its surface, so as to ensure its safe use, and anti-corrosion bridge treatment method is one of them. It is manufactured in a specific technological environment and has good anti-corrosion performance. What are the technical requirements of anti-corrosion bridge surface treatment? The bridge factory will give you a detailed introduction below.
热镀锌桥架主体对1.5~3mm厚度,小平均厚度≥6m,小局部厚度6m >3mm厚度 60am局部6m防护处理的表面光泽应不低于60%.检测方法:按GB1743,油膜光泽度测定法,用光泽度仪测量数字直接显示。表面防护层应具有表4中规定的3级耐盐雾性。
The surface gloss of the main body of hot-dip galvanized bridge should not be less than 60% for protection treatment of 1.5-3 mm thickness, minimum average thickness (> 65 am), minimum local thickness (> 6 mm) and local thickness (> 3 mm), 60 am). Detection method: According to GB1743, oil film gloss measurement method, digital direct display is measured by gloss meter. The surface protective layer shall have the salt fog resistance of Grade 3 specified in Table 4.


当宽度大于400mm时,极限偏差为±4mm,当宽度小于等于400mm时,极限偏差为±3mm说明:盖板取正偏差,槽底宽取负偏差,热镀锌防护处理平面度允差每米不大于8mm,电镀锌和喷漆,防护处理平面度允差每米不大于4mm.
When the width is more than 400 mm, the limit deviation is (+4 mm). When the width is less than or equal to 400 mm, the limit deviation is (+3 mm). This means that the cover plate is positive deviation, the bottom width of the tank is negative deviation, the flatness tolerance of hot-dip galvanizing protection treatment is not more than 8 mm per meter, the flatness tolerance of galvanizing and spraying paint is not more than 4 mm per meter.
以上是对防腐桥架表面处理的技术要求的简单介绍,防腐桥架在使用的时候适合在腐蚀性环境、大跨距、重载荷条件下进行使用,且它具有很高的机械强度,防火性能强,抗老化性能强,造型美观,安装方便,并且它的各种性能大大优于其他的桥架制品。
Above is a brief introduction of the technical requirements for surface treatment of anti-corrosion bridge. Anti-corrosion bridge is most suitable for use in corrosive environment, long-span, heavy load conditions. It has high mechanical strength, strong fire resistance, anti-aging performance, beautiful appearance, convenient installation, and its various properties are much better than other bridge products.
这就是今天由济南防腐电缆桥架小编给大家介绍的纯干货的内容了,相信今天的内容能给大家带来一定的帮助,如果您对文章的内容还有不明白的地方,欢迎大家点击我们的网站留言讨论:https://www.sdhangfeng.com
This is the content of the pure dry goods introduced to you by Jinan Antiseptic Cable Bridge Frame Editor. I believe that today's content can bring you some help. If you still don't understand the content of this article, you are welcome to click on our official website to discuss: https://www.sdhangfeng.com.
上一篇:电缆桥架的施工报价是多少?
下一篇:如何进行电缆桥架布线及电缆桥架装置时要留意些什么?
下一篇:如何进行电缆桥架布线及电缆桥架装置时要留意些什么?
相关文章 / Recommended news
- 山东电缆桥架屋顶吊装:配件清单+标准化流程,新手也能零失误
- 济南电缆桥架安装:200多斤600×200桥架,这样吊装又
- 山东电缆桥架定制:耐火板与防火型的核心区别,一文读懂避坑指南
- 济南电缆桥架选型误区:100×100规格加隔板难?航丰的方案破解施工难题
- 山东电缆桥架避坑!贯穿孔成火灾“隐形通道”?3步防火实操筑牢防线
- 济南电缆桥架铺设踩坑,层数、根数、限制,规范不看必返工
- 山东电缆桥架(镀锌款)接地线误区,接错必返工,规范要点一文说清
- 济南电缆桥架线缆捆扎错了=埋隐患,4种规范方法,施工必看
- 山东不锈钢桥架现场打孔避坑!4步标准流程,90%施工方少走弯路不损桥架
- 山东电缆桥架选型封神指南!记住3句话,70%工程方避开选型陷阱不花冤枉钱
阳极氧化铝合金桥架
托盘式电缆桥架
梯式电缆桥架
梯式不锈钢电缆桥架
深灰色金属防火电缆桥架


