电缆桥架安装的现场要求
电缆桥架安装的现场要求:
Installation of cable bridge:
1、土建工程应全部结束且预留孔洞,预埋件符合设计要求,预埋件安装 牢固,强度合格。
1, the civil works shall be completed and the holes shall be reserved, and the embedded parts shall conform to the design requirements, the installation of the embedded parts shall be strong and the strength will be qualified.
2、桥架架设沿线模板等设施拆除完毕,场地清理干净,道路畅通。
2, the bridge is set up along the line of the road and the other facilities have been dismantled, the site is cleared and the roads are cleared.
3、室内电缆桥架的安装宜在管道及空调工程施工基本完毕后进行。如需交叉作业,既要做好电气工程的成品保护,又要执行其他分项工程成品保护揩施。
The installation of indoor cable bridge is suitable for the construction of pipe and air conditioning. If it is necessary to cross the work, it is necessary to do the protection of the finished product of electrical engineering, and to perform the protection of the other parts of the project.
如有需要,欢迎新老客户前来选购!我们本着质优价廉的宗旨来为您提供产品和服务。真诚期待与您合作!
If need, welcome new and old customers to come and choose! We offer products and services to you in the spirit of quality and low price. Sincerely looking forward to cooperating with you!
上一篇:镀锌电缆桥架的惯用耐腐蚀方法
下一篇:热镀锌桥架和镀锌桥架制作工艺上的区别
下一篇:热镀锌桥架和镀锌桥架制作工艺上的区别
相关文章 / Recommended news
- 山东电缆桥架屋顶吊装:配件清单+标准化流程,新手也能零失误
- 济南电缆桥架安装:200多斤600×200桥架,这样吊装又
- 山东电缆桥架定制:耐火板与防火型的核心区别,一文读懂避坑指南
- 济南电缆桥架选型误区:100×100规格加隔板难?航丰的方案破解施工难题
- 山东电缆桥架避坑!贯穿孔成火灾“隐形通道”?3步防火实操筑牢防线
- 济南电缆桥架铺设踩坑,层数、根数、限制,规范不看必返工
- 山东电缆桥架(镀锌款)接地线误区,接错必返工,规范要点一文说清
- 济南电缆桥架线缆捆扎错了=埋隐患,4种规范方法,施工必看
- 山东不锈钢桥架现场打孔避坑!4步标准流程,90%施工方少走弯路不损桥架
- 山东电缆桥架选型封神指南!记住3句话,70%工程方避开选型陷阱不花冤枉钱
阳极氧化铝合金桥架
托盘式电缆桥架
梯式电缆桥架
梯式不锈钢电缆桥架
深灰色金属防火电缆桥架


