热镀锌桥架和镀锌桥架制作工艺上的区别
1、冷镀锌托盘的过程:清洗钢材表面化学处理为电镀液后,镀含有氧化锌溶液。直流一极,以钢铁,一极对锌板电镀液。
1, cold galvanized tray process: cleaning steel surface chemical treatment for electroplating solution, plating with Zinc Oxide solution. DC pole to steel, a pair of zinc plate plating solution.
通电后锌以分子状态置换到钢材表面。如果添加光亮剂钝化反映云彩像光亮镀层。
When the power is turned on, the zinc is displaced to the surface of the steel by molecular form. If the brightener is added, the passivation reflects the clouds as bright as the coating.
2、热镀锌桥架的工艺过程:将钢件或铸件浸入熔融的锌液中在其表面形成锌 — 铁合金或锌和锌 — 铁合金覆盖层的工艺过程和方法。热浸镀锌层较厚,抗腐蚀能力强。热镀锌锌层过冷光源,但更薄,防锈能力较弱。
2. The process of hot-dip galvanizing bridge: the process and method of forming a zinc iron alloy or zinc and zinc iron alloy coating on the surface of molten steel by dipping steel or casting into molten zinc bath. Hot-dip galvanized layer is thicker and corrosion resistant. Hot galvanized zinc layer over cold light source, but thinner and less rust preventive ability.
3、主要生产不同的工艺,热镀锌电缆桥架是在锌锅溶液中通过,电镀锌桥架则是通过电极反应得到。
3 、 the main production of different processes, hot galvanized cable bridge is in the zinc pot solution through, the zinc plating bridge tray is obtained by electrode reaction.
4、应用在钢结构上的电镀锌桥架一般防锈效果都不是很好,小于主要镀锌量,和镀锌不均匀通常两三年都出现生锈,质量差的暴露在潮湿环境中十几天就生锈了。
4, the application in steel structure of electro galvanized bridge general antirust effect is not very good, mainly less than galvanized and galvanized uneven, usually two or three years appear rust, the poor quality of the exposure in the humid environment of ten days rust.
客户的满意就是对我们的肯定,欢迎您前来选购我公司的产品,我们一直以为您提供产品为己任并一直坚持这样做。欢迎您的光临。
Customer satisfaction is our affirmation, you are welcome to come to buy our products, we have always thought you provide products as their own responsibility, and has always insisted on doing so. Welcome to our company.
上一篇:电缆桥架安装的现场要求
下一篇:型桥架提高了利用率的使用
下一篇:型桥架提高了利用率的使用
相关文章 / Recommended news
- 山东电缆桥架屋顶吊装:配件清单+标准化流程,新手也能零失误
- 济南电缆桥架安装:200多斤600×200桥架,这样吊装又
- 山东电缆桥架定制:耐火板与防火型的核心区别,一文读懂避坑指南
- 济南电缆桥架选型误区:100×100规格加隔板难?航丰的方案破解施工难题
- 山东电缆桥架避坑!贯穿孔成火灾“隐形通道”?3步防火实操筑牢防线
- 济南电缆桥架铺设踩坑,层数、根数、限制,规范不看必返工
- 山东电缆桥架(镀锌款)接地线误区,接错必返工,规范要点一文说清
- 济南电缆桥架线缆捆扎错了=埋隐患,4种规范方法,施工必看
- 山东不锈钢桥架现场打孔避坑!4步标准流程,90%施工方少走弯路不损桥架
- 山东电缆桥架选型封神指南!记住3句话,70%工程方避开选型陷阱不花冤枉钱
阳极氧化铝合金桥架
托盘式电缆桥架
梯式电缆桥架
梯式不锈钢电缆桥架
深灰色金属防火电缆桥架


